homehome

PRODUCTS

5 - motor control device and voltage regulators AC

CEI 2172
Single-phase AC voltage regulators. Input voltage: 230 Vac +/- 15%. Output voltage: 230 Vac +/- 3%. Available power from 2 kVA to 10 kVA. Static switching circuit. Microprocessor-based control. Can be switched under load.
CEI 1151
Power supply for small 12 Vdc 3-A motors. Equipped with relay for reversing direction of rotation. Variable current adjustable by means of a trimmer. Output voltage adjustable from 3 to 15 Vdc. Power supply 18 Vac. When the forward and reverse commands are switched off, the motor slows down via short-circuit braking. Output voltage and current limiting LED indicators. DIN rail mount.
CEI 2049
24 Vdc motor control device. Maximum current: 8A. Speed or torque regulation. Control by means of a trimmer mounted on the board or by a 0 to 10 Vdc analog signal. Ramp up control by means of a trimmer. When the OFF command is sent, the motor slows down via short-circuit braking. Maximum-I trimmer. Command and static switching. 24 V PNP logic forward/reverse command.
CEI 2096
Power supply for small 24 Vdc 5-A motors. Equipped with relay for reversing direction of rotation. Variable current adjustable by means of a trimmer. Output current: 24 Vdc. Supply voltage: 18-24 Vac. When the forward and reverse commands are switched off, the motor slows down via short-circuit braking. Mosfet-assisted zero-current relay switching system. The board was tested by performing 15,000,000 operations under maximum load and cycles of 4 startups per second.
CEI 2145
Stepper motor control device. Maximum voltage: 40 Vdc. Output current: 3.5 A. Peak current: 4 A. Step and half-step modes. Control frequency: maximum 5 kHz. Electronic short circuit protection. Controls: analog - serial - pulse.
CEI 2187
Drive for motor step step. Tension max 90 Vdc. Current of escape 10 To seriale Comando RS 485/422 or impulses or potenziometro. Seriale connection RJ12 IN+OUT. Limit of adjustable current with trimmer 25 turns. Protection side AC: 2 fuses incorporate to you on the card. Signallings: Excessive temperature - Run - excessive Current. Assembly express on guide DIN. Dimensions: 120 x 165 x P 80 milimeter Weight: 780 g Container: ABS and Box in anodized aluminium. Certification CE.
CEI 2111
Power converter. Vin: 3x400 Vac. Vout: 540 Vdc. Integrated power supply contactor. Insertion pre-charge. Maximum current: 100 A dc. Can have two or three outputs with fast-blow fuse protection. Switching control: 24Vdc 100mA. Thermostat for thermal protection.
CEI 2200
Stepper motor control device. Maximum voltage: 40 Vdc. Output current: 1.5 A. Peak current: 4 A. Step and half-step modes. Control frequency: maximum 5 kHz. Electronic short circuit protection.